The ILDA ShowPlayer is another feature for show laser systems. Up to 255 pre-programmed laser sequences are played via DMX signals. With the ILDA ShowPlayer, show laser systems with ILDA connection can be easily integrated into an existing DMX system. The ILDA ShowPlayer is used in light and laser installations or show laser systems where no computer is required.

Controls DMX => ILDA-Outpur
Standard DMX512 (5 Channels)
255 preprogrammed laser sequences
Very nice high-resolution animations
X / Y-resolution 12Bit, RGB-resolution 8Bit
Easy handling, easy installation
Including power supply 12V / 200mA
Dimensions: 105mm x 65mm x 164mm

For many years there is the ILDA standard in the field of show lasers. For trouble-free operation, even over longer distances, better quality ILDA cables are required. Available in black and potted standard lengths 5m, 10m and 20m.

ILDA cable 25pin in high quality
Shielded version with SUBD connector
In the color black with potted plug
Available lengths 5m, 10m, 20m
Required for trouble-free operation of show lasers

The G120D scanning system has proven itself over many years. This scanning system is ideally suited for beam shows and graphic shows of our show lasers. The structure is very simple. Only one driver board for two scanners, two G120D scanners with brackets and the power supply are needed for a laser projection. The G120D scanners are particularly robust in continuous operation of show lasers.

Laser scanning system 30k for Graphic- and Beamshows
Including mounted laser mirror
Control via analog X / Y signals
Inversion of X and Y axis
Optional power supply 24V / +/-1.5A
Other accessories on request

The CT6800 scanner set is a fast scanning system, for high demands, both for beam, but especially for graphic shows, text or logo projections. The system runs under +/- 24V. The maximum scanning speed is around 50.000 pps with a scanning angle of 8 °. The system consists of X / Y holders, scanners, drivers and the necessary cables.

Laser scanning system 60k for Graphic- and Beamshows
Includes mounted laser mirror and scanner block
Control via analog X / Y signals
Inversion of X and Y axis
Optional power supply 24V / +/-1.5A
Other accessories on request

The CT6210H / CT6215H scanner set is a very fast scanning system, for very high demands, both for beam, but especially for graphic shows, text or logo projections. The system runs under +/- 24V. The maximum scanning speed is around 60.000 pps with a scanning angle of 8 °. The system consists of X / Y holders, scanners, drivers and the necessary cables.

Laser scanning system 60k for Graphic- and Beamshows
Includes mounted laser mirror and scanner block
Control via analog X / Y signals
Inversion of X and Y axis
Optional power supply 24V / +/-1.5A
Other accessories on request

We develop standard and customized DMX tools. Control systems via DMX protocol are nowadays indispensable in the field of stage and show as well as industry. DMX transmitter modules as well as DMX receiver modules up to 512 channels are manufactured individually on customer request. You will find a small selection here.

USB==>DMX Interface incl. Software
DMX-Demux 16way, DMX-OptBankRGB, DMX-Relais (2way)
DMX-Relais (8fach), DMX-Dimmer 800W, DMX-Stepper Interface
DMX-Cable 3m, 5m, 10m, 15m, 25m, 50m, 100m
Individual DMX development on request
Other accessories on request

For all show laser system suitable emergency switch with latching function for immediate shutdown of the laser. Unlocking by simply turning the red button. Mounting holes for table and wall mounting.